|
The Avalon consists of front and rear cowls along with a top canopy, all molded in heavy duty Fiber-glass Reinforced Plastic. The rear cowl includes a full floorboard.
- The front and rear body parts are ready for paint. Each body part has been primed with a hi-build primer and then wet hand sanded,with 1000 grit sandpaper to provide you with a good painting surface.
- The cowls come with full automotive type wiring with switches, flashers, combination switch, and provision for two hot wires for a music system and cigarette lighter. The whole circuit is controlled with 6 individual fuses set in a single automotive fuse box. A twin set of wind tone horns are included!
- The front cowl provides a storage box under the hood which is electrically operated by a switch that is located in the lockable glove box on the dash. All switches have aluminum labels, including the forward reverse switch below the seat.
-
Lighting for the front cowl is provided by two 55 watt halogen lamps. This complete kit also comes with direction indicators. The horns are controlled by a single stalk automotive combination switch which is wired into the loom with the help of an 8 pin connector. The rear body has two cluster type tail lights with running lights, brake lights, and directional indicator lights. Additional wires are provided to connect the brake switch and to power up your electrical system.
-
Plush, fully upholstered seats in Art Leather are provided with a bench type seat and two individual back rests, which are provided with foldable armrests. A set of fully retractable seat belts are provided for both seats.
-
Powder coated steel supports are provided to support a fully painted hard top, 62” in length. For the golfer, there are powder coated steel supports with removable bag holders.
-
A special booklet-type instruction manual that is complete with photos, guides even the first time builder through all the stages of assembly. A complete hardware kit is included and ensures that no other fasteners or hardware is required. (To top it off, a set of tools are provided.)
-
Prior to your receiving your kit, all body parts (and all items), have been pre-drilled and pre-fitted at the factory. To assemble all you have to do is to take off the original body pieces and bolt on our kit!
PLEASE NOTE ALL IS WIRED FOR 12 VOLTS
(description courtesy of B&B Preferred, LLC)
Please NOTE: This is an oversized item. Additional shipping charges may be assessed.
| Available Options: |
| Cart Make: |
|
|
